What is Abrasion tester?
Abrasion tester is the device to test the Abrasion Resistance of Textile Fabrics,plastics and rubber etc
DIN Abrasion Tester
Applicable extensive material abrasion characteristics, The adequate testingt area can take this apparatus directly which is the largest features of this tester., easy operation and simpling, Provided with the proportion balance.
Key Specification:
Diameter of wear wheel: 150mm
Sample size: 16.2 mm x thickness of 6-10 mm
Sample moving speed: 4.2mm per revolution
Load weight: 5N, 10N (0.25, 0.5, 1.0, 1.5, 2.0 kgs)
Sandpaper grits: #60
Roller length: 460mm
Wear trip: 40m
Weight: 55KG
Standards:
DIN-53516, JIS-K6369, GB/T 209918.3, GB 20265-2006GB20266-2006, ISO -4649, SATRA-TM174, BS-903, JIS-K6264, GB/T9867
Martindale tester, martindale abrasion tester. Pilling tester. Taber abrasion tester, Snag Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters. The unique design allows removal of individual sample holders for examination without lifting the top motion plate. Standard sample holders and 9 and 12kpa weights are included.
Available with 4, 6, 8 or 9 test positions
Standards:
ISO 5470, DIN 53863/53865, BS 3424/5690, BS EN 388/530 ASTM 4966/4970, IS 12673, PR EN ISO 12947-1, PR EN ISO 12945-2, SATRA TM31, ISO 20344
Rubber Abrasion Tester:
This machine is used to test the wear extent of mixed material of sulfur rubber or other rubber, such as soles, heels, etc. Place test piece on the test machine, add a certain load in order to rotate rubbing specimen of sandpaper, and check its abradability.
Dimension: 720× 460× 580 mm
Weight: 105 kg
Standards: ASTM D1630 |