|
|
|
|
 
|
   
|
We manufacture Color Assessment Cabinet,Glossmeter,Color meter,Color Reader,UV integrator,Range finder,Digital force gauge,Lux meter,Roughness tester,Brightness meter etc.

Color Assessment Cabinets

Color measuring instruments

Glossmeters

Haze meter

UV Integrator

Thickness gauges

Surface Roughness tester

Surface Resistance meter

Surface Thermometer

Gaussmeters

EMF Meter

Range finder

Lux meters

 

 

More>>>

CM-2300D Color meter

CM-2300d Color Meter

Designed for versatility in various applications, the CM2300D color meter is a portable integrating sphere color meter incorporating Numerical Gloss Control. The CM-2300d is a high performance, low cost, portable colorimeter ideal for measuring paints, plastics, automobiles, ceramics, architectural interiors, textiles, paper, food, etc.

Model:CM-2300d

Illumination/observation system:
d/8 (diffuse illumination, 8-degree viewing), equipped with simultaneous measurement of SCI (specular component included)/ SCE (specular component excluded) Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7 and JIS Z8722 Condition C standard

Sphere Size: d52mm

Light-receiving element: Silicon photodiode array
(dual 40 elements)

Spectral separation device: Diffraction grating.

Wavelength range: 360 to 740nm

Wavelength pitch: 10nm

Half bandwidth: Approx. 10nm

Reflectance range: 0 to 175%; resolution: 0.01%

Light source: 2 Pulsed xenon lamps (X4)

Measurement time: Approx. 1.5 seconds (approx. 2 seconds for fluorescent measurement)

Minimum interval between measurements: 3 seconds for SCI/SCE (4 seconds for fluorescent measurement)

Battery performance: Alkaline manganese: up to 1000 measurements

Measurement/illumination area: d8mm/ d11mm


Repeatability:
Spectral Reflectance: Standard deviation within 0.2% (380 to 740nm Within 0.4%)
Colormetric values: Standard deviation within ΔE*ab 0.08
Measurement Conditions: White calibration plate measured 30 times at 10-second intervals after white calibration was performed

Inter-instrument agreement: Within ΔE*ab 0.4 (MAV/SCI) based on 12 BCRA Series II color tiles compared to values measured with master body

Measurement Mode: Single measurement/automatic averaging of multiple measurements (auto mode: 3, 5, 8 times/manual mode)

Interface: RS-232C, Standard

Observer: 2/10 degrees (CIE 1931/2°, CIE 1964/10°)

Illuminant: A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources

Display data: Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result

Color space / colorimetric data:
L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313/CIE), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T, L*a*b*, L*C*h*

Data Memory: 700 (SCI/SCE as a set)

Tolerance judgement:
Tolerance for color difference (both box and elliptical tolerances can be set)

Power Source: 4 AA-size battery or AC adapter

Operating Environment:
5 to 40°C; relative humidity 80% or less wwith no condensation

Storage Environment: 0 to 45°C, relative humidity 80% or less with no condensation)

Size (W x H x D)/Weight: 69 x 96 x 193mm/670 grams

Standard accessories:
White calibration plate, Target mask ?8mm, RS-232C cable, AC Adapter, AA-size battery (x4)

Optional Accessories:
Hard case, Dust cover set, Dust cover, SpectraMagic(software), Zero calibration box


Return to top >

 

(C) Copyright reserved © sales@color-reader.com