Lubricated Oils Foaming Characteristic Tester

This instrument is used to determine the foaming character of lubricated oil ,  to evaluate tendency for foam forming of lubricated oil and stability of the foam.
It conform to ASTM D892 <Standard Test Method for Foaming Characteristic of Lubricated Oils> etc.

Main Spec and Technical Parameter
1.  Power supply：                                    AC220V ±10%  50Hz；
2.  Main Heater:                                       650 W
3.  Auxiliary Heater:                                   1000W
4.  Refrigerator:                                       500W
5.  Air Flux:                                          94 ± 5 ml, Adjustable

1. Regulation Range of the Temperature: (High temperature Bath)

           Room Temperature ~ 99.9 ℃

1. Regulation Range of the Temperature: (Low temperature Bath)

                         5 ~ 99.9 ℃
8.  Accuracy of Temperature Control                                  ± 0.2℃
9.  Timer:                                          5 Minutes & 10 Minutes
10.  Accuracy of the Timer:                          0.01 %   ±0.05 sec ( 20 ℃)
11.  Environmental temperature:                          - 10 ~ +40 ℃
12.  Humidity:                                             ≤ 85%
13.  Power:                                                ≤3000W

Viscocity meter

TBN tester/Petroleum product water-soluble acid and the alkali tester

Automatic pitch softening point tester

Melting point tester

Pour point tester

Flash-point-tester

Kinematic Viscosity Tester