What is a Laser Diameter Measuring Instrument?
Laser Diameter Measuring Instrument is one kind Physical Measuring Meter for measuring the diameter and dimensions by laser in non-contact way with high accuracy.
LD001 Laser Diameter Measuring Instrument:
Features:
*Laser two-dimensional scanning: Two bunches of lasers to do outer diameter measurement of non-contact, non-damage from the different angle, it can effectively eliminate error caused by work vibration;
*DSP data processing technique: The sampling speed is quick, precision is high and the performance is stable;
*The reaction control integration module with PID constitute the online outer diameter closed loop observation and control system (e. G.: Diameter of the object measured is slight big or small, transmission rate is big or small), which can change the transmission rate to control the outer diameter be tested through adjusting the power supply with PID. It's easy to operate, user can setup a boundary numerical value, main engine will give an alarm automatically while the test result exceeds the set value.
*It processes R485 communication interface, can be connected with PC machine and PLC and then composed into long-distance collection and distribution supervisory system, The transmission length may reach 200m
Introduction:
The LD001 Laser Diameter Instrument is a high accuracy one without contacting designed on the basis of the laser scan measuring principle. The 2-dimension measuring mode is applied to the instrument, and the 2-way laser beam is in the positive cross design in the measuring field, thus effectively eliminating testing errors caused by work piece shocks. It is special suitable for real-time measurement of the production field, and widely used in the test of round wire materials such as communication cables, optical cables, co-axial cables and power cables, and the test of various kinds of other round work piece diameters.
Technology Parameter:
Measure Range(mm) 0.2~30
Measure Precision(um): 2.0
Sensitivity(um): 1.0
Communication Interface RS485
Relative Humidity no dew than 85%
Environment Temperature 4~40
Power Consumption(W) <50
Scanning speed(m/s) >50
Packing Specification(mm) Main Engine: 441*170*546
Weight: 8kg
Product Allocation Laser Diameter Measuring Instrument: 1 unit; Calibrating stand: 1 set
TLSM Series Laser diameter measuring gauge:
It obtains the dimensions of measured target via laser beam scanning.caliper meter can be widely used to measure objects hot, soft, friable as well as not easy to be measured with other traditional methods, especially, suited to online measurement in the production of wire rod, bar, tubing, mechanical and electronic elements.
The automatic mode of caliper meter is applied in continuous measurement and manual mode does in single time or continuous measurement. Caliper meter can be set in some respects, i.e. up and low limits, Max.- Min. limit and corresponding warning for overrun; It can also calculate maximum, minimum and average values, e.g. to measure maximum and minimum values of a rotary cylinder, deviation of a roller as well as similar dimensions.
Technical Specifications
Type |
7 digitals LED digitron |
| Measuring range |
Accuracy of measurement |
duplicability |
Resolution ratio |
| TLSM101 |
0.01-1 |
±0.001 |
±0.0005 |
0.0001 |
| TLSM110 |
0.1-10 |
±0.002 |
±0.0005 |
0.0001 |
| TLSM130 |
0.6-30 |
±0.003 |
±0.0005 |
0.0001 |
Characteristics
| Display mode |
7 digitals LED digitron |
| Beam scanning speed |
1680 times/sec |
| Measured dimensions |
external diameter and seam(12 data can be measured simultaneously at most) |
| Measuring modes |
automatic and manual(incl. key board trigger and external trigger, host control) |
| Measuring initial trigger |
internal continuous trigger, keyboard trigger and external trigger;Min. short circuit signal 30ms is required or a low level signal with collector open-circuit is supplied for external trigger. |
| Host interface |
RS-232C(optional for RS-485) |
| Analog interface |
Output is the difference between measure value and nominal;value, with +10V to -10V corresponding to +2mm to -2mm |
| Resolution ratio |
0.1μm,5mv/1μm |
| Statistical calculation |
average value, Maximum, Minimum, Mix.-Min. from measurement start to measurement termination |
| Tolerance setting |
Normal 7digitals at most
Up-limit 7 digitals at most
Low-limit 7 digitals at most
Max-Min 7digitals at most
Offset value 7digitals at most |
| Warning |
overrun warning for Up and Low limits, and Mix.-Min |
| Contactless switch |
1a*3(0.1A,AC100V) |
| Measurement of transparent object |
available |
| Working atmosphere |
0C-45C;35/100-85/100RH(dewless) |
| Power supply |
AC85V-265V;50Hz/60Hz |
| Power |
30W |
| Weight |
control unit:3kg;sensor:2kg |
| Dimensions |
control unit: 310mmX240mmX85mm
sensor: 420mmX110mmX35mm |
Standard delivery
Description |
Quantity |
Description |
Quantity |
| sensor sender |
1 |
control unit |
1 |
| sensor receptor |
1 |
signal cable |
2 |
| sensor base |
1 |
supply cord |
1 |
Portable Ultrasonic thickness gauges>>
Coating thickness gauge>>
Dial thickness gauge>>
Return to top >
|